100mm Wide Polyurethane Helicopter Tape sold by the metre.
Orders of more than 1 metres will be sent in a continuous length to the number of metres ordered.
0.36mm thick Polyurethane film with an Acrylic Pressure sensitive adhesive.
Will not yellow or (Milk) discolour.
Originally developed to protect helicopter rotor blades from flying object damage, it was then adopted by motor racing for protecting the leading edge of F1 cars from expensive stone chip repairs. It is now widely used in all manner of applications including protection of bike frames etc.
Protection for your Car, Bike, Boat, Helicopter, Plane, Electrical & photographic equipment etc (Basically anything that you want to prevent getting damage by knocks and scrapes).
Features & Benefits:
-
Cost Effective
-
Tear & abrasion resistant
-
Easy to apply (See below)
-
Completely Transparent
-
Prevents Damage in abrasive environments
-
Offers superior adhesion without the use of a primer
How to apply:-
-
Tape performs best if allowed to warm to room temp before application
-
Ensure surface is clean and dry
-
Easily cut to required Size with good scissors or craft knife
-
Remove paper liner from one end to expose adhesive
-
Apply exposed end to surface with pressure then smooth
Convertape always come up trumps, I wouldn’t shop anywhere else!
Just before setting off to Paris a couple of years ago, I invested a mere £30 on Helicopter tape to cover my shiny new carbon fibre bike.
The tape saved the frame from many a knock, chip and scratch including those that would have happened whilst travelling in the back of
a van or on the Eurostar with 100 other bikes. Thanks Convertape, the bike still looks brand new!
